The print Leaves will give you the feeling of autumn and beautiful colors. The diaper has a wonderful print of different leaves in deep red shades. The print is designed in Denmark with a lot of love to the nature.
One size diaper growing with your child
Natural Snap-In is a one size diaper that fits most children from about 6 – 18 kg. You can adjust the size of the diaper with the snaps at the front of the diaper. This way you can always get the right size of the diaper, even though your child grows.
The Snap-In AIO diaper
AIO (all-in-one) is the term for a cloth diaper where insert and diaper shell are attached to each other.
Elskbar Natural Snap-In is an AIO diaper, with a clever design where inserts can be unsnapped and the drying time is significantly shortened. The entire diaper needs to be washed after use, as the diaper shell has a built-in absorbency and gets wet.
We call this type of diaper a Snap-In AIO.
Bamboo and organic cotton
The diaper has got two included inserts – a long inserts and a smaller booster. They are made of three layers of bamboo and organic cotton. Bamboo is known to be a very well absorbent material, perfect for cloth diapers. The organic cotton gives the inserts extra softness against your child’s bum.
Both inserts can be snapped in to the diaper shell and you avoid them moving around when your baby is active.
Elskbar brings nature closer to your child, with natural colors, beautiful flowers and trees and soft natural materials right from the start of life. With Elskbar your child gets a natural and chemical-free start of life.
Customize absorbency for your child's needs
The diaper inserts offer many options for adjusting the absorbency to your child’s needs. If your child pees a little, you can choose to use only the small booster and you get a nice and trim diaper. If your child pees a lot you can choose to use only the long insert.
You can snap both inserts into the diaper shell if your child pees a lot, for naps or for night.
With both inserts in the diaper you get 9 layers of super absorbent material, and if you fold one of the inserts a second time in the wet zone, you get up to 12 layers of absorbency. It’s really a lot of absorbency.
The eco-friendly diaper shell
The waterproof part of the diaper is made of the material TPU. Often, cloth diapers have PUL as the waterproof outer layer, but it is produced by a chemical process that is not that environmentally friendly. TPU, on the other hand, is manufactured during heat treatment and is therefore free of chemical glue. We are proud to offer cloth diapers with TPU.
The inside of the diaper shell has a layer of bamboo terry which gives the diaper an extra layer of absorbency and at the same time it is soft and gentle against your child’s skin.
Natural Snap-In fits really well on most kids. It is narrow between the legs, not too big on the bum, and has a snug fit around the legs without tightening too much. Together, it allows your child to move freely. A good fit also helps you avoid leaks.
It is important to put the diaper on your child in the correct way. Therefore, we recommend that you take a look at our fitting guide. If the diaper is put on correctly, you have a greater chance of success with cloth diapers.
- Outer material
- 100% polyester with TPU laminate
- Inner material
- 85% bamboo
- 15% polyester
- 70% bamboo
- 30% organic cotton
- How to wash a cloth diaper
The entire diaper should be washed after use. Just snap off the inserts before washing. The diaper has to be washed at max 60 degrees with a cold prewash. Avoid detergents containing fabric softeners, optical brighteners, or chlorine bleach.
See detailed washing instructions for cloth diapers.
- How to dry a cloth diaper
We recommend hanging the insert to dry, but they can be tumbled on low heat if needed. The waterproof diaper shell, on the other hand, may not dry in the tumble dryer, as the heat can damage the waterproof TPU coating and shorten the life of the rubber bands.
See detailed guide to drying cloth diapers.